When I logged into the game, I saw that Outfitter had been updated. However, using the GUI, I could not change sets. I came to the forum, did some reading, then decided that my sets are so simple, I'd just recreate them.

I deleted both the deprecated and new Outfitter saved variables while completely logged out of the game.
I logged back into the game, created one set, then swapped out gear and created the second set.

In both cases (before delete and after), I cannot get the GUI (clicking on the up and down arrow) to pick a set. It is stuck on the last one I created.

I decided to see if I could live without the macros and just do all the saves and swaps with the slash commands, but they no longer work in the new outfitter. I get the following error:

user:/AddOns/wykkydsOutfitter/Lib/ABT.lua:76: function expected instead of nil
stack traceback:
user:AddOns/wykkydsOutfitter/Lib/ABT.lua:76: in function 'fn'
EsoUI/Ingame/SlashCommands/SlashCommands.lua:108: in function 'DoCommand'
EsoUI/Ingame/ChatSystem/ChatSystem.lua:1849 in function 'ChatSystem:SubmitTextEntry'
EsoUI/Ingame/ChatSystem/ChatSystem.lua:2682: in function 'ZO_ChatTextEntry_Execute'
14406795741938050902:3 in function '(main chunk)'
(tail call): ?

Edit: Reinstalled framework and the slash commands work with framework installed. It did pull in my gear properly using the macros, but until I re-saved the gearsets using the slash commands, it didn't mark my gear as being in any set. I didn't install the deprecated outfitter though because my sets were simple enough to just recreate.

Hi, thanks for all the updates and hard work. Everything looks like much better, cleaner and stable! The swaps are a bit slower but they work perfectly. Thanks a lot. I will try to test is deeper and deeper!

1.9.4.1 installs both:
Addons/mhOutfitter
Addons/wykkydsOutfitter

mhOutfitter is old, and only lives to feed savedvariables to the new wykkydsOutfitter.

After a few versions this old addon, mhOutfitter, will be phased out and removed from the .zip file. At that time you will all be notified and you will be able to remove it from your addon list.

IF YOU UPDATE AND DO NOT HAVE YOUR SAVED VARIABLES/SETS... then you should probably:
1 - Exit to DESKTOP (log out all of the way)
2 - delete Live\SavedVariables\wykkydsOutfitter.lua
3 - Load into the game
4 - Enable addon: "Wykkyd's Outfitter (deprecated)"
5 - Enable addon: "Wykkyd's Outfitter 1.9.4.1"
6 - Log into all characters, 1 by 1, that use Outfitter

It's fixed in my local copy. I'm a few hours from being done and able to publish.

I want to bring to you one of the most urgent issues I have not seen mentioned. So, in Outfitter, the "Go naked" feature is currently broken. This is totally impairing the ability of my male templar to twerk via the /danceredguard. "Think about the children!" For the love of god someone fix this!

swaped weapons out of combat(debug log,was in a city)

if skillbar1 skill matches newskillbar2 skill -> no swap

@ABT.lua
GetSlotName() returns only names for current qbar but is used to test both new qbars(before swap)
(since the game has no version of GetSlotName( pi, s ) )

if it would be used to test after weapons swap for qbar2 it would work

You have to swap weapons after telling the set to load for your second bar to swap, all while out of combat. Other than that I'm really not following you, sorry.

ok got the bug in a small setup with only 1 slot in the qbars used,the skill in the second qbar gets not changed if switching from "Test" to "Test02" (weapon1 active while switching qbars), it stays "Blazing Shield" and is not switched for "Puncturing Sweep"

["Sets"] =
{
["version"] = 2,
["keys"] =
{
[2] = "Test02",
[1] = "Test",
},
["Test02"] =
{
[2] =
{
[4] =
{
["skillLine"] = 1,
["ability"] = 2,
["skillType"] = 1,
["name"] = "Puncturing Sweep",
},
},
[1] =
{
[4] =
{
["skillLine"] = 1,
["ability"] = 2,
["skillType"] = 2,
["name"] = "Stampede",
},
},
},
["Test"] =
{
[2] =
{
[4] =
{
["skillLine"] = 1,
["ability"] = 6,
["skillType"] = 1,
["name"] = "Blazing Shield",
},
},
[1] =
{
[4] =
{
["skillLine"] = 1,
["ability"] = 2,
["skillType"] = 1,
["name"] = "Puncturing Sweep",
},
},
},
},

added debug code to ABT.lua line 167
"d( "WF_Outfitter.ABT.loadSet SkillName: " .. sn .. " Qbar: " .. pi .. " allowSwap: true" )
else
d( "WF_Outfitter.ABT.loadSet SkillName: " .. sn .. " Qbar: " .. pi .. " allowSwap: false" )
end
"

debug output:
WF_Outfitter.ABT.loadSet SkillName: Puncturing Sweep Qbar: 1 allowSwap: true
WF_Outfitter.ABT.loadSet SkillName: Puncturing Sweep Qbar: 2 allowSwap: false
[WO] Loading Action Bar Set 'Test02'
[WO] Weapon 1 Loaded, Swap Bars to Continue...
[WO] Weapon 2 Loaded, Bars Complete...

Shoot me a list of the exact skills on both bars, and the names you used to save the bars, and the macro configuration you are/aren't using to swap them.

Or just email me your savedvariable file for both Outfitter and Framework. [email protected]

Watched the video and followed it to the letter. Did as you said and deleted framework and outfitter and started over, and now it's worse. Now, slot 1, 2, and 4 are not swapping along with my ultimate. If I had done something wrong, why would only a few abilities swap and not others. You'd think ALL of them wouldn't swap.

Thanks for the response though! By far my favorite add-on!

It's not graphical. The skills aren't there at all. They're not saving. Some are, but others aren't.

It happens sometimes to me too, most often is a graphical problem, my skills appeart to be X but they changed to Y, sometimes the client delays the weapon swap so it actually doesn't swap, it is why I sometimes press the key 2 times and always goes ok.

I have 23 macros set up. All of them swap gear & both skill bars. I am having 0 issues like you describe and cannot re-create your problems. I would suggest you completely uninstall both mhFramework & mhOutfitter. Delete the savedvariable/ files for both addons. Reinstall both and try again completely from scratch.

I highly recommend you watch the video that is linked on the addon download pages for both addons (same video in both). Even if you're an old pro that video could give you some tips.

So do like I said. Use a single skillset to store both bars.