Currently Equipped -- Equipped Set Display : Combat Mods : Elder Scrolls Online AddOns

(9 Kb)

Download

Updated: 06/27/23 08:36 PM

Add Favorite

Install Help

Pictures

File Info

Compatibility:	Firesong (8.2.5)
Updated:	06/27/23 08:36 PM
Created:	12/20/22 06:01 AM
Monthly downloads:	609
Total downloads:	12,649
Favorites:	18
MD5:
Categories:	Combat Mods, Bags, Bank, Inventory, Graphic UI Mods, Raid Mods, Utility Mods

Currently Equipped -- Equipped Set Display Popular! (More than 5000 hits)

Version: 1.2.4

by: AlekWithK [More]

Currently Equipped displays your currently equipped sets, as well as their completion status, in a color coded format. It allows you to, at a glance, determine whether your setup is correct or not, without having to mouse into the inventory and hover over pieces to check for set bonuses.

It's especially intended for use with addons like Dressing Room and Wizard's Wardrobe, that can, at times, fail to correctly swap your gear, leaving you with missing pieces and incomplete sets. Never start a pull again only to realize that your backbar has two-handed skills, but a destruction staff equipped!

The addon differentiates between completed sets (green), incomplete sets (red, except monster sets), and "overcompleted" sets and monster sets (yellow, as occasionally this is intentional).

All colors are modifiable. Settings allow you to toggle the UI lock, display the addon only in trial and arena instances, hide the display in combat, and set a delay for hiding the display in combat in places like BRP where the window between combat pulls may be very small.

Commands:
/ce -- Open the settings
/cereset -- Force reset the GUI (there is a keybind option as well as a button in settings to do this, should a bug occer)

Notes:
-The addon does not differentiate between "Perfected" and "Non-Perfected" as these set bonuses are shared, and their setID's are the same
-The addon will select the highest value for your equipped status from each bar. For example, having 5 pieces of a set complete on front bar, and 6 on the back bar, will show 6/5 on the display.

Dependencies:
-LibAddonMenu-2.0
-LibSets
-LibSetDetection

Feel free to contact me if you have questions, comments, or suggestions!

# Version 1.2.4
# API Bump
# Fixed an issue with 12pc set numbers being cut off
# Added Sanity's Edge zone for 'Show in Trials/Arenas' option (TY Lernaeus!)
# KNOWN ISSUE: CE will sometimes break completely when an armory build is equipped (reaload UI to fix)

# Version 1.2.3
# API Bump

# Version 1.2.2
# Display no longer hides itself if UI is unlocked, even if Hide In Menu option is on, so that it can be easily moved

# Version 1.2.1
# Addon now properly hides itself when in game menus, with an option to disable this behavior

# Version 1.2.0
# Added French language support (ty Van!)

# Version 1.1.0
# Added localization support
# Modified string formatting (ty ExoY!)

# Version 1.0.2/3
# Minor fixes related to ESOUI

# Version 1.0.1
# Added Rockgrove to ZoneID's
# Fixed an error when wearing too many sets (now supports 14)
# Fixed a string format issue when language was set to French

# Version 1.0.0
# Initial Release

Optional Files (0)

Archived Files (8)

File Name	Version	Size	Uploader	Date
Currently Equipped -- Equipped Set Display	1.2.3	9kB	AlekWithK	03/25/23 07:03 PM
Currently Equipped -- Equipped Set Display	1.2.2	9kB	AlekWithK	02/21/23 07:37 PM
Currently Equipped -- Equipped Set Display	1.2.1	9kB	AlekWithK	01/19/23 09:54 PM
Currently Equipped -- Equipped Set Display	1.2.0	9kB	AlekWithK	01/04/23 07:22 PM
Currently Equipped -- Equipped Set Display	1.1.0	8kB	AlekWithK	01/02/23 07:53 PM
Currently Equipped -- Equipped Set Display	1.0.3	7kB	AlekWithK	12/24/22 06:49 PM
Currently Equipped -- Equipped Set Display	1.0.2	7kB	AlekWithK	12/24/22 07:01 AM
Currently Equipped -- Equipped Set Display	1.0.0	64kB		12/20/22 06:01 AM

Comment Options

Page 1 of 3

11/18/23, 09:23 AM
Cheshire Forum posts: 1 File comments: 18 Uploads: 0	Thank you very much for the interesting addon, I have an idea, add color separation for mythic items (default puple), what do you think about it?

10/28/23, 01:50 AM

AlekWithK

Forum posts: 0

File comments: 19

Uploads: 2

Re: Armory Breaks Addon

Originally Posted by PulseFour

Hey,

Thanks for the awesome addon.

I have noticed that when using the armory, it breaks the addon - I think the issue is that it just doesn't recognise the armory gear change, so to fix it I have to equip a new piece in all gear slots.

Yeah I've known about this bug and spent some time trying to fix it but it appears to be not as simple as it looks. By adding a significant delay to the addon update I can get it to work *sometimes* with the armory, but I don't think that's worth the significant delay it adds to non-armory swaps. Something about the way the armory swaps gear is very different from the way addons like Wizards do it.

I can't promise a fix for this bug in the near future as I'm pretty busy but I am aware of it and would love to fix it if I get a chance!

10/23/23, 09:49 AM
PulseFour Forum posts: 0 File comments: 6 Uploads: 0	Armory Breaks Addon Hey, Thanks for the awesome addon. I have noticed that when using the armory, it breaks the addon - I think the issue is that it just doesn't recognise the armory gear change, so to fix it I have to equip a new piece in all gear slots.

10/01/23, 09:53 PM

AlekWithK

Forum posts: 0

File comments: 19

Uploads: 2

Re: Sets not appearing

Originally Posted by Vyxea

Hi, thanks for the addon!

My currently equipped sets are not showing up when I'm in overland zones, it shows them when I use the debug feature but they vanish again if I switch zones.

Is there any fix for this?

Do you have the option to only show them in trials turned on? Make sure that's off if you want it to work in the overland!

09/29/23, 03:55 PM
Vyxea Forum posts: 0 File comments: 14 Uploads: 0	Sets not appearing Hi, thanks for the addon! My currently equipped sets are not showing up when I'm in overland zones, it shows them when I use the debug feature but they vanish again if I switch zones. Is there any fix for this?

07/27/23, 09:22 PM

AlekWithK

Forum posts: 0

File comments: 19

Uploads: 2

Originally Posted by clere00

Very good addon increased my parse by 200% and stopped many throws

HAHAHA yes just as intended, in the next patch I will add another 10% DPS boost

07/23/23, 04:19 AM
clere00 Forum posts: 0 File comments: 12 Uploads: 0	Very good addon increased my parse by 200% and stopped many throws

06/27/23, 07:19 AM

AlekWithK

Forum posts: 0

File comments: 19

Uploads: 2

Originally Posted by Lernaeus

UI currently breaks if worn set has more than 1 digit in total set count

Edit: Also no support for Sanity's Edge. Zone ID for that trial is 1427

Will look to fix both of these issues with the next patch!

06/22/23, 08:56 AM
Lernaeus Forum posts: 0 File comments: 1 Uploads: 0	UI currently breaks if worn set has more than 1 digit in total set count Edit: Also no support for Sanity's Edge. Zone ID for that trial is 1427 Last edited by Lernaeus : 06/22/23 at 09:05 AM.

04/06/23, 06:03 PM

AlekWithK

Forum posts: 0

File comments: 19

Uploads: 2

Originally Posted by NeuroticPixels

Any chance you'd create a keybind or chat command that lets us toggle (show/hide) the info? I don't need the info up all the time, nor only in trials or arenas. It would be great to be able to toggle the info whenever I need it.

I'm sure this is something I could implement! Can't give you an exact timeframe but I'm sure it could be done by the end of the week.

04/06/23, 08:26 AM
NeuroticPixels Addon Addict Forum posts: 211 File comments: 879 Uploads: 0	Any chance you'd create a keybind or chat command that lets us toggle (show/hide) the info? I don't need the info up all the time, nor only in trials or arenas. It would be great to be able to toggle the info whenever I need it.

04/02/23, 07:14 PM

AlekWithK

Forum posts: 0

File comments: 19

Uploads: 2

Re: bug report

Originally Posted by CheeseTuber

Hi!

Thanks for the addon.

Got an error message that Bug Catcher caught when I was in the settings trying to change the colours. I will post it below for your reference. Hope it helps.

Cheers!

Hmmm interesting, does this happen when trying to use any of the color changers? And does the addon otherwise work normally, or not at all for you?

04/02/23, 04:38 AM

CheeseTuber

Forum posts: 2

File comments: 15

Uploads: 0

bug report

Hi!

Thanks for the addon.

Got an error message that Bug Catcher caught when I was in the settings trying to change the colours. I will post it below for your reference. Hope it helps.

Cheers!

Code:

bad argument #1 to 'table.getn' (table/struct expected, got nil)
stack traceback:
[C]: in function 'table.getn'
user:/AddOns/CurrentlyEquipped/CESetFunctions.lua:85: in function 'CE.UpdateUI'
user:/AddOns/CurrentlyEquipped/CurrentlyEquipped.lua:196: in function 'CE.SaveHeadColor'
<Locals> r = 0.8353, g = 0.7922, b = 0.8039, a = 1 </Locals>
user:/AddOns/CurrentlyEquipped/CurrentlyEquippedMenu.lua:80: in function 'setFunc'
<Locals> r = 0.8353, g = 0.7922, b = 0.8039, a = 1 </Locals>
user:/AddOns/LibAddonMenu-2.0/controls/colorpicker.lua:46: in function 'UpdateValue'
<Locals> control = ud, forceDefault = F, valueR = 0.8353, valueG = 0.7922, valueB = 0.8039, valueA = 1 </Locals>
user:/AddOns/LibAddonMenu-2.0/controls/colorpicker.lua:75: in function 'ColorPickerCallback'
<Locals> r = 0.8353, g = 0.7922, b = 0.8039, a = 1 </Locals>
/EsoUI/Common/ZO_ColorPicker/ZO_ColorPicker_Shared.lua:113: in function 'ZO_ColorPicker_Shared:Cancel'
<Locals> self = [table:1]{hasAlphaHeight = 225, hasAlpha = T, isUpdatingColors = F, alphaUpperLimit = 1, alphaLowerLimit = 0, initialA = 1, initialB = 0.8039, initialR = 0.8353, initialG = 0.7922, dialogName = "COLOR_PICKER", doesntHaveAlphaHeight = 200} </Locals>
/EsoUI/Common/ZO_ColorPicker/Keyboard/ZO_ColorPicker_Keyboard.lua:64: in function 'm_callback'
/EsoUI/Libraries/ZO_Dialog/ZO_Dialog.lua:111: in function 'HandleCallback'
<Locals> clickedButton = ud, dialog = ud </Locals>
/EsoUI/Libraries/ZO_KeybindButton/ZO_KeybindButton.lua:215: in function 'ZO_KeybindButtonMixin:OnClicked'
<Locals> self = ud, visible = T </Locals>
/EsoUI/Libraries/ZO_KeybindButton/ZO_KeybindButton.lua:286: in function 'ZO_KeybindButtonTemplate_OnMouseUp'
<Locals> self = ud, button = 1, upInside = T </Locals>
ZO_Dialog1Button2_MouseUp:3: in function '(main chunk)'
<Locals> self = ud, button = 1, upInside = T, ctrl = F, alt = F, shift = F, command = F </Locals>

03/28/23, 10:38 PM

AlekWithK

Forum posts: 0

File comments: 19

Uploads: 2

Originally Posted by user99

Have you considered adding armor bonus completions to this? There is the case where all 5 pieces are equipped yet the 5 piece armor bonus from passives on the tree are not being met.

That's an interesting idea! I could see it being useful adding an indicator like 2L/5M/0H in the first or last row of the display! Is that similar to what you're saying?

03/27/23, 10:18 AM
user99 Forum posts: 0 File comments: 3 Uploads: 0	Have you considered adding armor bonus completions to this? There is the case where all 5 pieces are equipped yet the 5 piece armor bonus from passives on the tree are not being met.

Page 1 of 3

Report this File